Awarding Strategies using High-Tec Engineering


FLIR CM78 Industrial Clamp with IR Thermometer Features

AC/DC (1000A or 1000V)

Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.

Non-Contact Safety

Save time by attaching the meter to the target when the panel is de-energized, then measure the active equipment when the panel is closed.

Spot-Laser IR Thermometer

Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.

Type K Thermocouple

Verify that associated current measurements and temperature readings are correctly aligned and in spec.

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

METERLiNK Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Bright Dual-LED Worklights

Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged & Shock-Resistant

Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

FLIR CM78 Industrial Clamp with IR Thermometer Specifications

Technical Summary
Range Basic Accuracy
AC/DC Current Range 1000 A +/- 2.5%
AC/DC Voltage 1000 V +/- 1.5%
Resistance 40.00 MΩ +/- 1.5%
Capacitance 4.000 mF +/- 3%
Frequency 4000 Hz +/- 31.5
Temperature (IR) -20 to 518°F, -29 to 270°C +/- 2%
IR Distance to Target Ratio 8 : 1 in
Temperature (Type K) -4 to 1400°F, -20 to 760°C +/- 3%
General Information
Bluetooth Range Max 32 ft (10 m)
Jaw Opening 42 mm (1.7 in, 2000MCM)
Safety Category CAT IV-600V, CAT III-1000V
Warranty Limited Lifetime
Certifications CE, UL, FCC