FLIR VP50
Non-Contact Voltage Detector + Worklight
The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods.
Rugged and Durable
Designed for long product life cycles and 3m (9.8′) drop tested, the VP50 will last you for years to come.
Enhanced Detection
The VP50 can reliably detect voltage in the latest safety outlets, electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions. The low-profile probe tip gets the sensor closer to electrical sources.
Intelligent Design
Built to reduce chance of dropping, the VP50 has an anti-roll case with double molded slip resistant grip. Vibration and Multi-color LED light alarms flash for voltage indication. There’s a bright LED flashlight on the back, and a convenient light on the tip for detection.
FLIR VP50 Features
Enhanced Detection
Uses a low-profile probe tip that gets the sensor closer to electrical sources and enhanced sensitivity to help detect voltage in the latest safety outlets.
Worklights
Intense (60-lumen) LED light source illuminates dimly lit locations – dual-LED convenience light at the probe tip lights up inspection targets.
Alarms
Multi-color flashing LEDs and vibration alarms make it harder to miss the presence of voltage (up to 1000V) in noisy environments.
High/Low Sensitivity
Detect voltage in electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions (using High Sensitivity mode).
Intelligent Design
Anti-roll case design and extruded grip reduces likelihood of drops, and features such as delayed start up, auto power off, and low battery indicator maximize battery life.
Rugged & Durable
Robust battery door and pocket clip design is engineered for long product life cycles, and the low profile detection tip bolsters a common weak point.
FLIR VP50 Specifications
| Technical Summary | |
|---|---|
| Voltage Ranges | 90 to 1000 V 24 to 1000 V |
| Detection Distance | 0 to 5 cm (2 in) |
| Category Rating | CAT IV-1000 V |
| Frequency Range | 45 – 65 Hz |
| Built-in Worklight Torch | Yes |
| Vibrating Indication | Yes |
| On/Off Switch | Yes |
| Certifications | UL, CE |
| Warranty | Limited Lifetime |
*Disclaimer: Specifications are subject to change without notice. Availability of camera models and accessories subject to regional market considerations.
