Awarding Strategies using High-Tec Engineering

FLIR MR160

Imaging Moisture Meter With IGM™

The FLIR MR160 is the only moisture meter with the power to show you where to measure the problem. Featuring Infrared Guided Measurement (IGM) technology powered by a FLIR Lepton® thermal imaging sensor, MR160 helps you quickly see temperature patterns that point to potential hidden moisture so you know right where to place the meter probe to capture accurate readings.

FLIR MR160 Features

IGM

An 80 x 60, 4800-pixel Lepton® thermal imager powers IGM technology, visually indicating potential moisture areas via the color display

Pin and Pinless

Integrated pinless moisture measurements for fast detection, and external pin probe included with expandable probe options

Laser

Equipped with a laser and cross hair to easily reference the exact location of the potential moisture issue seen in the thermal image

Warranty

FLIR’s unique 2-10 warranty, covering parts and labor for two years and the detector for ten

FLIR Tools

Includes FLIR Tools professional reporting software for Mac or PC

Clear readings

Document thermal images and moisture readings together on one screen

FLIR MR160 Specifications

Model NumberMR160
Thermal Imaging
Thermal Imaging DetectorFLIR Lepton microbolometer
Image CalibrationAutomatic
Thermal Image Resolution4800 pixels (80 × 60)
Spectral Response8–14 μm
Field of View51° × 38°
Thermal Sensitivity< 0.15 °C
Image Frame Rate9 Hz
Image DisplayColor Moisture Alert
Minimum Focus Distance10 cm (4”)
Show less…
Moisture Measurement
Pin Moisture via External Probe Range (Accuracy)0–100% WME (± 5%)
Pin Moisture Groups9 material groups
Pinless Moisture Range0–100 relative measurement
Pinless Measurement Depth0.75″ (19mm) Max
Measurement Resolution0.1
Response Time Pinless100 ms
Response Time Pin Mode750 ms
General Information
Display TypeQVGA (320 x 240 pixel) 2.3” 64k color TFT
Saved Image File formatBMP with measurement values overlaid
Stored Image Capacity9999 images
Laser OrientationSingle laser pointer to center of thermal image
Power RequirementsIntegrated rechargable battery
Battery Power – Continuous Run Time / Typical Usage18 hours max / 4 work weeks
Battery3.7 V, 3000 mAh Li-ion rechargeable via micro USB
Drop Test9.8’ (3m)
Certification StandardsEN61326 (EMC), EN61010 (Battery + Charger), EN60825-1 Class 2 (Laser)
Agency ApprovalsFCC Class B, CE, UL
Warranty2 Yr Product, 10 Yr Thermal Detector

*Disclaimer: Specifications are subject to change without notice. Availability of camera models and accessories subject to regional market considerations.

MR160-Front